Carbonyl-Lron-Pulver Magnetisches Material Rohpulver Serie

Produkt Charakter The carbonyl iron powder magnetic material raw powder series is suitable for various high-frequency magnetic rings, high current molded inductors (SMD) high-frequency magnetic rings, injection molded inductors, etc. through different particle size combinations.   2.Spezifikation Carbonyl-Lron-Pulver Magnetisches Material Rohpulver Serie

Marks	Chemical Composition				Physical Property					Remark
					Particle size（μm）			Ddensity (g/cm³)
					D10	D50	D90	Loose Density	Tap Density
XJC-B1	Fe	C	O	N	1.5-2.5	3.0-4.5	6.0-8.0	2.0-3.0	3.5-4.5
	≥97.5	≤0.8	≤0.4	≤0.6
XJC-B2	Fe	C	O	N	1.0-2.0	2.0-4.0	5.0-7.0	2.0-3.0	3.5-4.5
	≥97.5	≤0.8	≤0.4	≤0.6
XJC-B3	Fe	C	O	N	1.0-1.2	1.5-2.2	2.5-3.5	2.0-3.0	3.5-4.5
	≥97.5	≤0.8	≤0.4	≤0.6
XJC-B4	Fe	C	O	N	1.5-2.5	2.5-3.5	5.0-6.5	2.0-3.0	3.5-4.5
	≥97.5	≤0.8	≤0.4	≤0.6
XJC	Fe	C	O	N	1.8-3.5	4.0-5.0	8.5-13.0	2.0-3.0	3.5-4.5
	Bal	≤0.02	≤0.3	≤0.03
Test equipment		1.Laser Particle SizeTester 2.Loose density and compacted de nsity 3.0xygen and Nitrogen Tester,Carbon and Sulfur Tester

 

Magnetic property Test Conditions	Magnetic ring size	Out diameter:10.73, inner diameter:6,height:3	Magnetic ring density	6.0-6.5
	Coil)	Diameter:0.3, number of turns:20 turns	Test frequenoy	100KHz/1V
	Molding powder loading amount	1g±0.05	Voltage withstand test	100V/35
	Test equipment	1.Digital bridge 2.Insulation impedance

  3 Bilder der SEM-Morphologie des Pulvers   4.Anwendung